XBOX 360 RROD Prevention Service

Prevent the RROD Before It Happens To You!

This cleaning and maintenance service will help prevent the RROD. Long story short the RROD is cause by the xBo 360 overheating. Without getting into details and using a bunch of computer engineering and chemistry that no one wants to ready anyway, here is the point: the heat stresses the solder that connects the GPU to the motherboard, eventually after constant exposure to overheating the solder will become brittle and crack. When this happens your xBox will give you the error known as the Red Light of Death.

An xBox 360 should be cleaned and given new thermal pads every two to three years to prevent damage. If your unit has not been cleaned it is at risk of RROD'ing in the near future.

The main source of overheating in a xBox 360 is the following two things:

1. The thermal paste and pads wear out. (These are designed to last about two years) 2. Dust builds up in your system and prevents heat from exiting the system.

Don't risk your system! Many things can go wrong from static electricity to forgetting how to put it back together. Let us do it professionally.

Service Benefits

- Flat Rate Service, Return Shipping is included! (Continental US Only)
- 48 Hour Return Time (Make sure you write cleaning and maintenance on the box to take advantage of this!)
- Thermal paste, pad and heat sink upgrades.
- Professional assembly/disassembly in an anti-static environment.
- If you happen to get the RROD within two years of the service you get 20% off our repair services.

Comming Soon

Click on the links for more information.

< Previous

Next >

Included In This Service

Professional Cleaning and Maintenance of your xBox 360.

1. We professionally disassemble your xBox 360 in an anti static environment. Our bench is completely grounded. Instead of a charge dissipating on to your main board our bench will dissipate the charge into the ground system of our building. This insures that your xBox 360 will not be fried by static electricity.

2. All dust is removed from the heat sink, main board, fan and case of the xBox 360. We use an ultra sonic bath to scrub out evert bit of dust. Your heat sink and fan will be as clean as when it came from the factory! Not too many people have an ultra sonic bath laying around. This is a major benefit of choosing our service.

3. We replace your thermal paste with arctic silver. It is a much better paste than the factory paste that was originally in your unit. After this, we professionally reinstall your heat sink. We modify the support structure of the heat sink to insure it is effective without bending your motherboard. (Most of the cheap x-clamp modifications bend your motherboard and do more harm than good).

4. We install new thermal pads and heat sinks on the accessory BGA/RAM chips. These mini heat sinks and thermal pads will help keep the xBox cool. They allow the heat to be pushed out by the fan at a higher rate, keeping the main-board cooler. This will allow you to game longer without risking your unit.

5. Your unit is professionally reassembled and returned. We insure that all the screws go where they are supposed to and that the shell fix together.

EE Guarantee

The Unbeatable EE Guarantee

When you send your system in to us for cleaning and maintenance we will record the service in our database. Your units serial number, repair number and warranty number will be linked to a record. All you have to do is send us an email with your serial number and name, and we will send you a coupon code for 20% off all of our RROD services if you are unlucky enough to get a RROD within two years.

We can offer this guarantee because the number one cause of the RROD is bad thermal paste/dirty units!

Dangers of Static Electricy

Dangers of Static Electricity

Static Electricity is: Static electricity refers to the build up of electric charge on the surface of objects. The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.

Long story short your PS3 motherboard if very, very sensitive to static electricity and can be shocked to death by static discharge from your own two hands! If your PS3 is fried by static electricity it is dead and cannot be revived.

How we protect your PS3

- All of our bench tops are made of hard plastic or wood. Both hard plastics and wood do not conduct electricity and do not build up static electricity.
- All of our technicians wear anti-static wrist bands, vinyl gloves, wear plastic sole shoes and work over vinyl mats.
- Our work bench is grounded into our buildings ground system. Any charge that builds up on the surface or one of our techs is immediately dissipated.

If you work on your own unit, please take precautions so you do not shock your PS3 motherboard! The damage is not reversible and your unit will be dead.